Setting Up The Network; Network Configuration Process - Canon imageRUNNER ADVANCE 6075 Series Service Manual

2
Technology > MEAP > Setting Up the Network > Network configuration process

Setting Up the Network

■ Network configuration process

To support a MEAP-enabled iR device via network (SMS, etc.), set up the network setting on
the touch panel of the iR device (this setting is [ON] by default).
1) Press [Settings/Registration] button, select [Preferences] > [Network] > [TCP/IP Settings] >
[Use HTTP] and press [On] button.
2 Technology > MEAP > Setting Up the Network > Network configuration process
Note:
In iR-ADV series, the System Manager ID and the System PIN are configured by
default, so "Network" and the items that follow are grayed out and cannot be selected.
Return to the top screen, press "Login" button at the lower left of the screen, login as
the system manager, and configure the settings.
The default setting for the System Manager ID is "7654321", and the password is"
7654321".
Note:
When using SSL, press [Settings/ Registration] button, select [Management
Settings]>[License / Other] > [MEAP Settings] > [SSL Settings] and press [On] button.
(This setting is applied to SSL setting on RUI. Vice versa, [On] set for SSL on RUI is
also applied to the touch panel.)
When [Use SSL] is set to On, the message dialog, [The Default Key is not set. Check
the Key and Certificate List settings in Certificate Setting.], is shown. Press [OK] button
for this message.
F-2-215
2) Press [OK] button to return to Main Menu screen.
3) Restart the device.
2-169
F-2-216
F-2-217
2-169