Defaults
N/A
Command
EXTENDED COMMUNITY LIST
Modes
Command
Version
History
9.7(0.0)
Related
deny bandwidth
Commands
criteria to deny incoming or outgoing traffic..
redistribute
Redistribute routes into BGP.
Z9500
Syntax
redistribute {connected | static} [route-map map-name]
To disable redistribution, use the no redistribution {connected | static}
command.
Parameters
connected
static
route-map
map-name
Defaults
Not configured.
Border Gateway Protocol
Description
Introduced on the S-Series.
– link band width extended-community attribute as the matching
Enter the keyword connected to redistribute routes from
physically connected interfaces.
Enter the keyword static to redistribute manually
configured routes.
These routes are treated as incomplete routes.
(OPTIONAL) Enter the keyword route-map then the name
of an established route map.
Only the following ROUTE-MAP mode commands are
supported:
•
match ip address
•
set community
•
set local-preference
•
set metric
•
set next-hop
•
set origin
•
set weight
If the route map is not configured, the default is deny (to
drop all routes).
417