Neighbor Local-As - Dell MXL 10GbE Reference Manual

neighbor local-as

To accept external routes from neighbors with a local AS number in the AS number path, configure
Internal BGP (IBGP) routers.
Syntax
neighbor {ip-address | peer-group-name} local-as as-number [no-
prepend]
To return to the default value, use the no neighbor {ip-address | peer-
group-name} local-as command.
Parameters
ip-address
peer-group-
name
as-number
no prepend
Defaults Not configured.
Command ROUTER BGP
Modes
Command
Version 9.2(0.0)
History
Related bgp four-octet-as-support
Commands
neighbor maximum-prefix
Control the number of network prefixes received.
Syntax
neighbor {ip-address | peer-group-name} maximum-prefix maximum
[threshold] [warning-only]
To return to the default values, use the no neighbor {ip-address | peer-
group-name} maximum-prefix maximum command.
Parameters
ip-address
peer-group-
name
Border Gateway Protocol IPv4 (BGPv4)
Enter the IP address of the neighbor in dotted decimal
format.
Enter the name of the peer group to set the advertisement
interval for all routers in the peer group.
Enter the AS number to reset all neighbors belonging to that
AS. The range is from 0 to 65535 (2 byte), from 1 to
4294967295 (4 byte) or from 0.1 to 65535.65535 (dotted
format).
Specifies that local AS values do not prepend to
announcements from the neighbor.
Introduced on the MXL 10/40GbE Switch IO Module.
— enables 4-byte support for the BGP process.
Enter the IP address of the neighbor in dotted decimal
format.
Enter the name of the peer group.
345