Neighbor Distribute-List - Dell MXL 10GbE Reference Manual

Command ROUTER BGP
Modes
Command
Version 9.2(0.0)
History

neighbor distribute-list

Distribute BGP information via an established prefix list.
Syntax
neighbor {ip-address | peer-group-name} distribute-list prefix-
list-name {in | out}
To delete a neighbor distribution list, use the no neighbor {ip-address |
peer-group-name} distribute-list prefix-list-name {in | out}
command.
Parameters
ip-address
peer-group-
name
prefix-list-
name
in
out
Defaults Not configured.
Command ROUTER BGP
Modes
Command
Version 9.2(0.0)
History
Usage Other BGP filtering commands include: neighbor filter-list, ip as-path
Information
access-list, and neighbor route-map.
Related
neighbor route-map
Commands
342
Introduced on the MXL 10/40GbE Switch IO Module.
Enter the IP address of the neighbor in dotted decimal
format.
Enter the name of the peer group to apply the distribute list
filter to all routers in the peer group.
Enter the name of an established prefix list.
If the prefix list is not configured, the default is permit (to
allow all routes).
Enter the keyword in to distribute only inbound traffic.
Enter the keyword out to distribute only outbound traffic.
Introduced on the MXL 10/40GbE Switch IO Module.
— assigns a route map to a neighbor or peer group.
Border Gateway Protocol IPv4 (BGPv4)