Default-Metric - Dell MXL 10GbE Reference Manual

Usage
To remove all configured debug commands for BGP, enter the no debug ip bgp
Information
command.

default-metric

Allows you to change the metric of redistributed routes to locally originated routes. Use this command
with the redistribute command.
Syntax
default-metric number
To return to the default setting, use the no default-metric command.
Parameters
number
Defaults 0
Command ROUTER BGP
Modes
Command
Version 9.2(0.0)
History
Usage
The default-metric command in BGP sets the value of the BGP
Information
MULTI_EXIT_DISC (MED) attribute for redistributed routes only.
Related
bgp always-compare-med
Commands
redistribute
description
Enter a description of the BGP routing protocol
Syntax
description {description}
To remove the description, use the no description {description}
command.
Parameters
description
Defaults none
336
Enter a number as the metric to be assigned to routes from
other protocols. The range is from 1 to 4294967295.
Introduced on the MXL 10/40GbE Switch IO Module.
— enables comparison of all BGP MED attributes.
— redistributes routes from other routing protocols into BGP.
Enter a description to identify the BGP protocol (80
characters maximum).
Border Gateway Protocol IPv4 (BGPv4)