Show Ip Bgp Inconsistent-As - Dell MXL 10GbE Reference Manual

Switch i/o module
Table of Contents

Advertisement

Field
Flaps
Duration
Reuse
Path
Example
Dell>show ip bgp flap-statistics
BGP table version is 210851, local router ID is 63.114.8.2
Status codes: s suppressed, d damped, h history, * valid, >
best
Path source: I - internal, a - aggregate, c - confed-external,
Origin codes: i - IGP, e - EGP, ? - incomplete
Network
Path
Dell>

show ip bgp inconsistent-as

View routes with inconsistent originating autonomous system (AS) numbers; that is, prefixes that are
announced from the same neighbor AS but with a different AS-Path.
Syntax
show ip bgp [ipv4 unicast] inconsistent-as
Command
Modes
Command
Version 9.2(0.0)
History
Usage
The following describes the show ip bgp inconsistent-as command shown
Information
in the following example.
Field
Network
Next Hop
Metric
Border Gateway Protocol IPv4 (BGPv4)
Description
Displays the number of times the route flapped.
Displays the hours:minutes:seconds since the route first
flapped.
Displays the hours:minutes:seconds until the flapped route
is available.
Lists all the ASs the flapping route passed through to reach
the destination network.
r - redistributed, n - network
From
EXEC
EXEC Privilege
Introduced on the MXL 10/40GbE Switch IO Module.
Description
Displays the destination network prefix of each BGP route.
Displays the next hop address of the BGP router. If 0.0.0.0 is
listed in this column, then local routes exist in the routing
table.
Displays the BGP route's metric, if assigned.
Flaps
Duration
Reuse
375

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mxl 40gbe

Table of Contents