Table of Contents
Advertisement
show ip bgp community-list
View routes that a specific community list affects.
Syntax
show ip bgp [ipv4 unicast] community-list community-list-name
[exact-match]
Parameters
ipv4 unicast
community-
list-name
exact-match
Command
•
Modes
•
Command
Version 9.2(0.0)
History
Usage
The show ip bgp community-list command without any parameters lists BGP
Information
routes matching the Community List and the output is the same as for the show
ip bgp command output.
The following describes the show ip bgp community-list pass command
shown in the following example.
Field
Network
Next Hop
Metric
LocPrf
Weight
Path
Example
Dell#show ip bgp community-list pass
BGP table version is 0, local router ID is 10.101.15.13
Status codes: s suppressed, d damped, h history, * valid, >
best
Path source: I - internal, a - aggregate, c - confed-external,
r - redistributed, n - network
Origin codes: i - IGP, e - EGP, ? - incomplete
368
(OPTIONAL) Enter the keywords ipv4 unicast to view
information only related to ipv4 unicast routes.
Enter the name of a configured IP community list (maximum
140 characters).
Enter the keyword for an exact match of the communities.
EXEC
EXEC Privilege
Introduced on the MXL 10/40GbE Switch IO Module.
Description
Displays the destination network prefix of each BGP route.
Displays the next hop address of the BGP router. If 0.0.0.0 is
listed in this column, then local routes exist in the routing
table.
Displays the BGP route's metric, if assigned.
Displays the BGP LOCAL_PREF attribute for the route.
Displays the route's weight.
Lists all the ASs the route passed through to reach the
destination network.
Border Gateway Protocol IPv4 (BGPv4)
Advertisement
Table of Contents
