Dell MXL 10GbE Reference Manual page 377

advertised-
routes
dampened-
routes
detail
flap-statistics
routes
received-
routes
[network
[network-mask]
denied-routes
[network
[network-mask]
Command
•
Modes
•
Command
Version 9.2(0.0)
History
Usage
After a peer reset, the contents of the notification log messages is displayed in hex
Information
values for debugging.
The following describes the show ip bgp neighbors command shown in the
following examples.
The Lines
Beginning with:
BGP neighbor
Border Gateway Protocol IPv4 (BGPv4)
(OPTIONAL) Enter the keywords advertised-routes to
view only the routes the neighbor sent.
(OPTIONAL) Enter the keywords dampened-routes to view
information on dampened routes from the BGP neighbor.
(OPTIONAL) Enter the keyword detail to view neighbor-
specific internal information for the IPv4 Unicast address
family.
(OPTIONAL) Enter the keywords flap-statistics to view
flap statistics on the neighbor's routes.
(OPTIONAL) Enter the keyword routes to view only the
neighbor's feasible routes.
(OPTIONAL) Enter the keywords received-routes then
either the network address (in dotted decimal format) or the
network mask (in slash prefix format) to view all information
received from neighbors.
(OPTIONAL) Enter the keywords denied-routes then
either the network address (in dotted decimal format) or the
network mask (in slash prefix format) to view all information
on routes denied via neighbor inbound filters.
EXEC
EXEC Privilege
Introduced on the MXL 10/40GbE Switch IO Module.
Description
Displays the BGP neighbor address and its AS number. The
last phrase in the line indicates whether the link between the
BGP router and its neighbor is an external or internal one. If
they are located in the same AS, the link is internal;
otherwise the link is external.
NOTE: Configure the neighbor soft-
reconfiguration inbound command prior to
viewing all the information received from the neighbors.
377