Neighbor Advertisement-Interval - Dell MXL 10GbE Reference Manual

Command
Version 9.2(0.0)
History
Related bgp add-path
Commands prefix without the new paths implicitly replacing any previous ones.

neighbor advertisement-interval

Set the advertisement interval between BGP neighbors or within a BGP peer group.
Syntax
neighbor {ip-address | peer-group-name} advertisement-interval
seconds
To return to the default value, use the no neighbor {ip-address | peer-
group-name} advertisement-interval command.
Parameters
ip-address
peer-group-
name
seconds
Defaults
•
•
Command ROUTER BGP
Modes
Command
Version 9.2(0.0)
History
neighbor advertisement-start
To send BGP routing updates, set the minimum interval before starting.
Syntax
neighbor {ip-address} advertisement-start seconds
To return to the default value, use the no neighbor {ip-address}
advertisement-start command.
Border Gateway Protocol IPv4 (BGPv4)
Introduced on the MXL 10/40GbE Switch IO Module.
— allows the advertisement of multiple paths for the same address
(OPTIONAL) Enter the IP address of the neighbor in dotted
decimal format.
Enter the name of the peer group to set the advertisement
interval for all routers in the peer group.
Enter a number as the time interval, in seconds, between
BGP advertisements. The range is from 0 to 600 seconds.
The default is 5 seconds for internal BGP peers and 30
seconds for external BGP peers.
seconds = 5 seconds (internal peers)
seconds = 30 seconds (external peers)
Introduced on the MXL 10/40GbE Switch IO Module.
339