Version
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
Related Commands
•
redistribute
Redistribute routes into BGP.
Syntax
redistribute {connected | static} [route-map map-name]
To disable redistribution, use the no redistribution {connected | static} command.
Parameters
connected
static
route-map map-
name
Defaults
Not configured.
Command Modes
ROUTER BGP
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Description
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S-Series.
deny bandwidth
– link band width extended-community attribute as the matching criteria to deny incoming or
outgoing traffic.
Enter the keyword connected to redistribute routes from physically connected
interfaces.
Enter the keyword static to redistribute manually configured routes.
These routes are treated as incomplete routes.
(OPTIONAL) Enter the keyword route-map then the name of an established route map.
Only the following ROUTE-MAP mode commands are supported:
•
match ip address
•
set community
•
set local-preference
•
set metric
•
set next-hop
•
set origin
•
set weight
If the route map is not configured, the default is deny (to drop all routes).
Border Gateway Protocol
407