Network Backdoor - Dell MXL 10GbE Reference Manual

Usage The system software resolves the network address the network command
Information
configures with the routes in the main routing table to ensure that the networks are
reachable using non-BGP routes and non-default routes.
Related redistribute
Commands

network backdoor

Specify this IGP route as the preferred route.
Syntax
network ip-address mask backdoor
To remove a network, use the no network ip-address mask backdoor
command.
Parameters
ip-address
mask
Defaults Not configured.
Command ROUTER BGP
Modes
Command
Version 9.2(0.0)
History
Usage Although the system does not generate a route due to the backdoor config, there
Information is an option for injecting/sourcing a local route in the presence of network
backdoor config on a learned route.
redistribute
Redistribute routes into BGP.
Syntax
redistribute {connected | static} [route-map map-name]
To disable redistribution, use the no redistribution {connected | static}
command.
Parameters
connected
358
— redistributes routes into BGP.
Enter an IP address in dotted decimal format of the network.
Enter the mask of the IP address in the slash prefix length
format (for example, /24).
The mask appears in command outputs in dotted decimal
format (A.B.C.D).
Introduced on the MXL 10/40GbE Switch IO Module.
Enter the keyword connected to redistribute routes from
physically connected interfaces.
Border Gateway Protocol IPv4 (BGPv4)