Area Nssa No-Redistribute - Dell PowerConnect 8024 Cli Reference Manual

Command Mode
Router OSPF Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example configures the metric value and type for the default route advertised into
the NSSA.
console(config-router)#area 20 nssa default-info-originate 250
non-comparable

area nssa no-redistribute

Use the area nssa no-redistribute command in Router OSPF Configuration mode to configure
the NSSA Area Border router (ABR) so that learned external routes are not redistributed to the
NSSA.
Syntax
area-id
area nssa no-redistribute
area-id
no area nssa no-redistribute
area-id — Identifies the OSPF NSSA to configure. (Range: IP address or decimal from
•
0–4294967295)
Default Configuration
This command has no default configuration.
Command Mode
Router OSPF Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example configures the NSSA ABR.
console(config-router)#area 20 nssa no-redistribute
731
OSPF Commands