Show Ip Bgp Next-Hop - Dell MXL 10GbE Reference Manual

D
D
Dell#
Related show ip bgp
Commands

show ip bgp next-hop

View all next hops (using learned routes only) with current reachability and flap status. This command
only displays one path, even if the next hop is reachable by multiple paths.
Syntax
show ip bgp next-hop
Command
•
Modes
•
Command
Version 9.2(0.0)
History
Usage
The following describes the show ip bgp next-hop command shown in the
Information
following example.
Field
Next-hop
Via
RefCount
Cost
Flaps
Time Elapsed
Example
Dell>show ip bgp next-hop
Elapsed
Dell>
Border Gateway Protocol IPv4 (BGPv4)
70.70.23.0/24 100.10.10.2
70.70.24.0/24 100.10.10.2
— views the current BGP routing table.
EXEC
EXEC Privilege
Introduced on the MXL 10/40GbE Switch IO Module.
Description
Displays the next-hop IP address.
Displays the IP address and interface used to reach the next
hop.
Displays the number of BGP routes using this next hop.
Displays the cost associated with using this next hop.
Displays the number of times the next hop has flapped.
Displays the time elapsed since the next hop was learned. If
the route is down, this field displays time elapsed since the
route went down.
Next-hop Via
63.114.8.33 63.114.8.33, Gi 12/22
63.114.8.34 63.114.8.34, Gi 12/22
63.114.8.35 63.114.8.35, Gi 12/22
63.114.8.60 63.114.8.60, Gi 12/22
0 0 100 200 ?
0 0 100 200 ?
RefCount Cost Flaps Time
240984 0
135152 0
1 0
135155 0
0 00:18:25
0 00:18:13
0 00:18:07
0 00:18:11
381