Neighbor Default-Originate - Dell MXL 10GbE Reference Manual

neighbor default-originate

Inject the default route to a BGP peer or neighbor.
Syntax
neighbor {ip-address | peer-group-name} default-originate
[route-map map-name]
To remove a default route, use the no neighbor {ip-address | peer-
group-name} default-originate command.
Parameters
ip-address
peer-group-
name
route-map
map-name
Defaults Not configured.
Command ROUTER BGP
Modes
Command
Version 9.2(0.0)
History
Usage If you apply a route map to a BGP peer or neighbor with the neighbor default-
Information
originate command configured, the software does not apply the set filters in the
route map to that BGP peer or neighbor.
neighbor description
Assign a character string describing the neighbor or group of neighbors (peer group).
Syntax
neighbor {ip-address | peer-group-name} description text
To delete a description, use the no neighbor {ip-address | peer-group-
name} description command.
Parameters
ip-address
peer-group-
name
text
Defaults Not configured.
Border Gateway Protocol IPv4 (BGPv4)
(OPTIONAL) Enter the IP address of the neighbor in dotted
decimal format.
Enter the name of the peer group to set the default route of
all routers in that peer group.
(OPTIONAL) Enter the keyword route-map then the name
of a configured route map.
Introduced on the MXL 10/40GbE Switch IO Module.
Enter the IP address of the neighbor in dotted decimal
format.
Enter the name of the peer group.
Enter a continuous text string up to 80 characters.
341