Avaya DEFINITY Server CSI Maintenance Manual page 434

Maintenance Commands
Use status card-mem to display the following memory card information located
at active or standby SPEs:
Is a valid memory card in place?
Is the memory card write-protected?
What is the capacity of the inserted memory card?
What kind of system configuration - small or medium?
What is the number of pulses counted in the last erase operation?
What is the percentage of translation storage space used?
What are the names of files stored in the memory card, and what is date
and time (if available) when it was saved?
Action/Object Qualifier
status location
card-mem
print
Feature Interactions
If the Announcement feature is unavailable in the system features configuration,
the Data Present field is always n for the "announcements" file. The
Announcement feature requires a memory card with a minimum capacity of 4 MB.
If the memory card is less than 4 MB, Announcements cannot be save in the
memory card.
Core Dump features require 10 MB memory cards for saving core dumps. If the
memory card has a capacity less than 10 MB, the core dump operation fails.
434
Issue 5 October 2002
NOTE:
Beginning with Release 9, the memory card has no write protect
switch and no equivalent software mechanism.
Qualifier Description
Physical carrier position where the
memory card resides in a High or
Critical Reliability System
Simplex switch configurations=not
required.
Duplex switch configuration= "A" for
control carrier A in Processor Port
Network (PPN), or "B" for control carrier
B in PPN.
Report sent to printer.
Examples:
status card-mem
status card-mem A
status card-mem b print
Feature
Logins Defaults Interactions
init none see below
inads
craft
cust
rcust
nms
bcms
browse
555-233-119