Set Boot-Image - Avaya DEFINITY Server CSI Maintenance Manual

set boot-image

save translation
Processor Command Completion Status
SPE-A Success
SPE-B Success
Field descriptions
Processor
Command Completion
Status
set boot-image
Use set boot-image to direct the system to use 1 of 2 possible firmware image
files on the TN2501AP circuit pack.
Action/Object Qualifier
set boot- location
image
1
2
NOTE:
You must reseat the circuit pack before the firmware file specified in set
boot-image becomes the active boot image.
555-233-119
SAVE TRANSLATION
Identifies the processor carrier where translation data saves.
SPE-A/SPE-B
Displays a variety of messages, identifying the success or
failure of the command.
Qualifier Description
The physical location of the
circuit pack (UUCSS)
Directs the system to use the
Image 1 firmware file
Directs the system to use the
Image 2 firmware file
Example
set boot-image board 1B08
Error Code
0
0
Logins Defaults Feature Interactions
init
inads
craft
customer
Issue 5 October 2002
403