Reset Switch-Control; Reset System - Avaya DEFINITY Server CSI Maintenance Manual

Maintenance Commands

reset switch-control

Use reset switch-control to reset and initialize the switch control hardware and
firmware.
Action/Object
reset switch-control

reset system

Use reset system to reset the system beginning with the corresponding vector bit
set, a core dump is written to memory card, only if the memory card is the special
core dump card), the vector is cleared, and the requested restart is performed.
NOTE:
All successful reset system commands log users off.
Action/Object Qualifier
reset system level
Feature Interactions
The reset system command invokes system initialization like low-level
maintenance. Software never escalates requested reset levels; technicians
determine the levels.
Two hardware switches are associated with active SPEs. These hardware
switches override demand maintenance activities requested by system
technicians.
394
Issue 5 October 2002
Qualifier Qualifier Description
none none
Qualifier Description
1 = Warm Restart
2 = Cold 2
3 = Cold1
4 = Reboot
Logins Defaults
init
inads
craft
nms
Logins Defaults
init none
inads
craft
Feature Interactions
none
Feature Interactions
see below
555-233-119