Resume Hardware-Group; Save Announcements - Avaya DEFINITY Server CSI Maintenance Manual

resume hardware-group

resume hardware-group
Use resume hardware-group to resume the previous test hardware-group
command its canceled position. Entering another test hardware-group disables
the resume hardware-group command.
A canceled test hardware-group command appears as canceled on the status
hardware-group screen. A resumed test hardware-group command appears as
active on the status hardware-group screen.
Action/Object Qualifier
resume
hardware-group
Feature Interactions
Cancelling a test hardware-group command deactivates the test command.
The status hardware-group screen displays the state as canceled.
When the resume hardware-group command is entered to resume a
previously-canceled test hardware-group command, the state of the test
command will be changed to active on the status hardware-group
screen.

save announcements

Use save announcements to copy announcement data from the announcement
board to the MSS. The Card-Mem stores announcements for the system. By
default, announcement data writes to the MSS device in a simplex processor
(SPE) system, or to both MSS devices in a High or Critical Reliability System.
Also, save announcements can write to the MSS device on either processor, in a
High or Critical Reliability System.
If integrated announcement boards exist, this command is allowed. The system
denies save announcements if no announcement data modules and no
NETCON data modules are administered.
The switch notifies administrators if an attempt is made to save announcements to
an incompatible flash card. For example, if the command is issued against an old
12V card, this results in the error message: Pre-G3V9 format memory card
inserted.
Simplex
In a simplex system, no options for save announcements exist. This command
saves announcement files to the MSS device.
555-233-119
Qualifier Description Logins
none init
inads
Defaults Feature Interactions
none none
Issue 5 October 2002
399