Reset Board - Avaya DEFINITY Server CSI Maintenance Manual

reset board

reset board
Use reset board to perform a soft reset of every specified, administered port on
the port circuit pack. Ports must be busied out before the port circuit pack resets.
!
WARNING:
This command is service disrupting and may cause extraneous alarms.
Action/Object Qualifier
reset board location
repeat
number
Output
The following example shows the output from reset board 1c07 and assumes
that the board in port network 1, carrier c, slot 7 is an analog board with three
administered ports.
reset board 1C07
Port Maintenance Name
01C07 ANL-BD
Field descriptions
Port address (cabinet-carrier-slot) of the reset maintenance object.
Port
Type of reset maintenance object.
Maintenance Name
Alternate way to identify maintenance objects.
Alt. Name
If the Object is The field contains
station
trunk
private CO line P/xxx (xxx=private CO line group number)
Success status of a busied out object (PASS, ABORT, FAIL)
Result
System-generated description of a command failure.
Error Code
555-233-119
Qualifier Description
Physical location of board:
PCSS
Number of times command
repeats (1– 99)
TEST RESULTS
Alt. Name Test No. Result
extension
xxx/yyy (xxx=trunk group, yyy=member number)
Logins Defaults
init carrier = 1
inads
repeat
craft
number = 1
nms
Error Code
53 PASS
Issue 5 October 2002
Feature Interactions
none
391