Avaya DEFINITY Server CSI Maintenance Manual page 400

Maintenance Commands
Duplex
If no options are specified, the system saves announcements to both processors'
MSS devices.
Action/Object Qualifier
save spe-active
announcements
spe-standby
Feature Interactions
!
WARNING:
Manager I is blocked for other activities until the command completes (up to
45 minutes).
If no announcement and no NETCON data module are administered, the
system denies the command.
If the announcement data module port is out of service or active
(performing an announcement playback), the system denies the command.
If no announcements are on the board or a user is in an integrated
announcements session, the system denies the command.
If the board is currently uploading or downloading, the system denies the
command. Users cannot record integrated announcements after save
announcements commences even though 15 channels are available for
announcement playback (one is reserved for uploading and downloading).
If no tape is in the tape drive or the tape is write-protected, the command
aborts during a save. The command also aborts if no NETCON data
module is available.
The save announcements command is not allowed if the MSS is in use.
The MSS may be in use by either another user or by maintenance.
The standby processor must be in service with shadowing enabled, so that
the system can save announcements to the standby processor.
400
Issue 5 October 2002
Qualifier Description
forces the system to write
announcement data to
specified devices in active
processors.
forces the system to write
announcement data to
specified devices in standby
processors.
Examples:
save announcements
save announcements
spe-active
save announcements
spe-standby
Feature
Logins Defaults Interactions
init none see below
inads
craft
cust
rcust
555-233-119