Status Cdr-Link; Output - Avaya DEFINITY Server CSI Maintenance Manual

status cdr-link

status cdr-link
status cdr-link [print]
Use status cdr-link to display the status of the call detail recording (CDR) links. If
a link is down, the report includes the number of times the switch has tried to
re-establish the link.
The CDR link is the physical link that the SPE uses to send call detail records to
an output device such as a Call Detail Recording Utility (CDRU). CDR links use
System Ports which are described in the PDATA-PT section of
system may have up to two CDR links, a primary and a secondary. See PRI-CDR
in Chapter

Output

The following information appears for both the Primary and Secondary CDR links,
whether or not both are used.
Link State
Number of
Retries
MaintenanceBusy
The following example shows the output of status cdr-link.
status cdr-link
Links state: up
Maintenance Busy? no
555-233-119
3.
The operational status of the link as follows:
up = The link is established and is capable of supporting the
application. This is the normal operational state.
down = The link is physically down.
extension not administered = An extension number for the
output device has not been assigned on the CDR system
parameters form.
The number of times the switch has tried to set up the link.
Whether the link is busied out for testing.
CDR LINK STATUS
Primary
Chapter 3. A
SPE A
Secondary
endpoint not administered
Issue 5 October 2002
437