Release Port - Avaya DEFINITY Server CSI Maintenance Manual

release port

Feature Interactions
Specific component maintenance performed on a link sometimes conflicts with
link maintenance, itself (busied out objects create link setup failure). Frequent link
re-setup attempts may delay faulty component recovery. For best results,
technicians should use busyout to disable attempted link re-setup.
Output
The following example shows the output from release pms-link.
release pms-link
Port Maintenance Name
PMS-LINK
Field descriptions
Port
Maintenance Name
Alt. Name
Result
Error Code
release port
Use release port to deactivate ports on circuit packs.
Action/Object Qualifier
release port location
Output
The following example shows the output from release port 1c0701, assuming
that the port in cabinet 1, carrier c, slot 7, circuit 1 is an analog port.
555-233-119
COMMAND RESULTS
Alt. Name
This field is left blank.
PMS-LINK
Not applicable.
Success status of a busied out object (PASS, ABORT, FAIL)
System-generated description of a command failure.
Qualifier Description
Physical location of the port:
PCSS
Result Error Code
PASS
Logins Defaults
init none
inads
craft
Issue 5 October 2002
Feature Interactions
none
383