Reset Io-Processor; Reset Interface - Avaya DEFINITY Server CSI Maintenance Manual

Maintenance Commands

reset io-processor

Use reset io-processor to reset and initialize the IO-Processor hardware and
firmware. The IO-Processor supports the packet interface and Data Channel data
scanners. The IO-Processor is simply reset. Failure of the reset can lead to the
processor being placed in the out-of-service state.
!
CAUTION:
Resetting the IO-Processor (which also resets the packet interface and Data
Channel data scanner) is disruptive. ISDN call service throughout the
system is disrupted, and some data may be lost on Data Channel
communications during the reset interval.
Action/Object Qualifier
reset none
io-processor

reset interface

Use reset interface to reset the Processor Interface circuit pack, reads its
associated software from tape, restarts applications processes, re-establishes
permanent switched calls, and sets up each enabled link. If the interface cannot
be established, a Major alarm raises on the interface and all enabled links
deactivate. When the Distributed Communications System (DCS), Audio
Information Exchange (AUDIX), or Call Management System (CMS) are initially
administered, links for these applications and submitting the form restarts the
interface. Before Processor Interface circuit packs are replaced, technicians must
power down the switch and restart it.
For troubleshooting, see
processor-channel''
interface (link traffic is interrupted).
!
WARNING:
The interface command interrupts operation of the AP, DCS, AUDIX, CMS or
ISDN-PRI.
Action/Object Qualifier
reset interface location
392
Issue 5 October 2002
Qualifier Description
none
''status interface'',
commands to locate problems before performing a reset
Qualifier Description
(cabinet-carrier-position) of the
processor interface (PI board).
The position determines cleared
processor interface circuit pack.
first processor interface = 1
second processor interface = 2
Logins Defaults
init
inads
craft
nms
''status link n'', and
Logins Default
init none
inads
craft
Feature Interactions
none
''status
Feature Interactions
none
555-233-119