OSPF C
OMMANDS
SHOW IP PROTOCOLS OSPF
show ip protocols ospf
Overview
Use this command to display OSPF process parameters and statistics.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax
show ip protocols ospf
Mode
User Exec and Privileged Exec
Examples
To display OSPF process parameters and statistics, use the command:
awplus#
Output
Figure 26-23: Example output from the show ip protocols ospf command
C613-50102-01 REV C
show ip protocols ospf
Routing Protocol is "ospf 200"
Invalid after 0 seconds, hold down 0, flushed after 0
Outgoing update filter list for all interfaces is
Redistributed kernel filtered by filter1
Incoming update filter list for all interfaces is
Redistributing: kernel
Routing for Networks:
192.30.30.0/24
192.40.40.0/24
Routing Information Sources:
Gateway
Distance: (default is 110)
Address
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Distance
Last Update
Mask
Distance List
"Getting Started
Guide.
987