Show Ip Ospf Virtual-Links - Allied Telesis IE340 Series Command Reference Manual

OSPF C
OMMANDS
-
SHOW IP OSPF VIRTUAL LINKS

show ip ospf virtual-links

Overview Use this command to display virtual link information.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax show ip ospf virtual-links
Mode User Exec and Privileged Exec
Examples To display virtual link information, use the command:
awplus#
Output Figure 28-22: Example output from the show ip ospf virtual-links command
awplus#show ip ospf virtual-links
Virtual Link VLINK0 to router 10.10.0.9 is up
Transit area 0.0.0.1 via interface vlan5
Transmit Delay is 1 sec, State Point-To-Point,
Timer intervals configured, Hello 10, Dead 40, Wait 40, 
Retransmit 5
Hello due in 00:00:02
Adjacency state Full
Virtual Link VLINK1 to router 10.10.0.123 is down
Transit area 0.0.0.1 via interface *
Transmit Delay is 1 sec, State Down,
Timer intervals configured, Hello 10, Dead 40, Wait 40, 
Retransmit 5
Hello due in inactive
Adjacency state Down
C613-50631-01 Rev A
show ip ospf virtual-links
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
"Getting Started
Guide.
1199