Monitoring Dial-Out Targets Within The Current Vr Context; Table 95: Show L2Tp Dial-Out Session Output Fields - Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Configuration Manual

For e series broadband services routers - broadband access

Table of Contents

JUNOSe 11.1.x Broadband Access Configuration Guide

host1#show l2tp dial-out session detail

To display information about the operational or administrative state:

host1#show l2tp dial-out session state connecting

To display dial-out information across all virtual routers

host1#show l2tp dial-out session allVirtualRouters

NOTE: The level of a user's permission determines the use of the allVirtualRouters

option. For example, if you have permission to view only the current virtual router,

then that is all that is displayed when you enter a command.

Table 95 on page 454 lists the show l2tp dial-out session command output fields.

Monitoring Dial-out Targets within the Current VR Context

Display configured dial-out targets within the current virtual router context.

This command displays aspects of the dial-out state machine and details about the

dial-out routes themselves. This section presents sample output. The actual output

on your router may differ significantly.

To display general information for all targets within the virtual router:

host1:dialout#show l2tp dial-out target

10.10.1.1/16

Monitoring Dial-out Targets within the Current VR Context

Operational status

For detailed information about operational states, see Dial-Out Operational States

show l2tp dial-out session

Field Description

IP address of the session

Current status of the session

Current operational status of session

Active Sessions

--------------