Monitoring Dial-Out Targets Within The Current Vr Context; Table 95: Show L2Tp Dial-Out Session Output Fields - Juniper JUNOSE SOFTWARE 11.2.X - BROADBAND ACCESS CONFIGURATION GUIDE 7-20-2010 Configuration Manual

Meaning
Related Topics

Monitoring Dial-out Targets within the Current VR Context

Purpose
Action
Copyright © 2010, Juniper Networks, Inc.
Table 95 on page 443 lists the show l2tp dial-out session command output fields.

Table 95: show l2tp dial-out session Output Fields

Field Name
Session
Status
Operational status
For detailed information about operational states, see Dial-Out Operational States on
page 403
show l2tp dial-out session
Display configured dial-out targets within the current virtual router context.
This command displays aspects of the dial-out state machine and details about the
dial-out routes themselves. This section presents sample output. The actual output on
your router may differ significantly.
To display general information for all targets within the virtual router:
host1:dialout#show l2tp dial-out target
Target Status
------ ------
10.10.1.1/16 up
10.1.1.0/24 up
To display detailed information about a particular target, specify the target IP address
and mask:
host1:dialout#show l2tp dial-out target 10.1.1.0/24
Target 10.1.1.0/24
Operational status: up
Active sessions: 10
Total triggers: 127
Failed sessions: 2
Connected sessions: 8
To display aggregate counts for targets in each of the possible operational and
administrative states:
host1:dialout#show l2tp dial-out target summary
To display detailed configuration, state, and statistics:
host1:dialout#show l2tp dial-out target detail
To display information about the operational or administrative state:
host1:dialout#show l2tp dial-out target state inService
To displays dial-out information across all virtual routers:
Chapter 16: Monitoring L2TP and L2TP Dial-Out
Field Description
IP address of the session
Current status of the session
Current operational status of session
Active Sessions
--------------
14
10
443