Table 95: Show L2Tp Dial-Out Session Output Fields - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12 Configuration Manual

Meaning
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
--------- ---------
10.10.1.1 connected
10.10.2.1 dormant
To display detailed information about a particular session, specify the trigger IP address
for the session:
host1#show l2tp dial-out session 10.1.1.1
Session 10.1.1.1
Operational status: dormant
To display aggregate counts for dial-out sessions in each of the possible operational and
administrative states:
host1#show l2tp dial-out session summary
To display detailed configuration, state, and statistics:
host1#show l2tp dial-out session detail
To display information about the operational or administrative state:
host1#show l2tp dial-out session state connecting
To display dial-out information across all virtual routers
host1#show l2tp dial-out session allVirtualRouters
NOTE: The level of a user's permission determines the use of the
allVirtualRouters option. For example, if you have permission to view only
the current virtual router, then that is all that is displayed when you enter a
command.
Table 95 on page 451 lists the show l2tp dial-out session command output fields.

Table 95: show l2tp dial-out session Output Fields

Field Name
Session
Status
Operational status
For detailed information about operational states, see Dial-Out Operational States on
page 411
show l2tp dial-out session
Chapter 16: Monitoring L2TP and L2TP Dial-Out
Field Description
IP address of the session
Current status of the session
Current operational status of session
451