Usb Receive Functional Address Endpoint N Registers (Usbrxfuncaddr[1]- Usbrxfuncaddr[15]); Usb Receive Functional Address Endpoint N Registers (Usbfifo[N]); Usb Recieve Functional Address Endpoint N Registers(Usbfifo[N]) Field Descriptions - Texas Instruments Concerto F28M35 Series Technical Reference Manual

Register Descriptions
18.5.25 USB Receive Functional Address Endpoint n Registers (USBRXFUNCADDR[1]-
USBRXFUNCADDR[15])
The recieve functional address endpoint n 8-bit read/write registers (USBRXFUNCADDR[n]) record the
address of the target function to be accessed through the associated endpoint (EPn).
USBRXFUNCADDRx must be defined for each receive endpoint that is used.
Note: USBTXFUNCADDR0 is used for both receive and transmit for endpoint 0.
For the specific offset for each register see
Mode(s): OTG A or Host
The USBRXFUNCADDR[n] registers are shown in
Figure 18-30. USB Receive Functional Address Endpoint n Registers (USBFIFO[n])
7 6
Reserved
R-0
LEGEND: R/W = Read/Write; -n = value after reset
Table 18-33. USB Recieve Functional Address Endpoint n Registers(USBFIFO[n])
Bit Field Value
7 Reserved 0
6-0 ADDR 0
1330
M3 Universal Serial Bus (USB) Controller
Table
Field Descriptions
Description
Reserved
Device Address specifies the USB bus address for the target Device.
Copyright © 2012–2019, Texas Instruments Incorporated
18-4.
Figure 18-30 and described in
ADDR
R/W-0
SPRUH22I – April 2012 – Revised November 2019
www.ti.com
Table 18-33.
0
Submit Documentation Feedback