Register Descriptions
18.5.52 USB Device RESUME Raw Interrupt Mask Register (USBDRIM), offset 0x414
The USB device RESUME raw interrupt status register (USBDRIM) is the masked interrupt status register.
On a read, this register gives the current masked status value of the corresponding interrupt. A write has
no effect.
Mode(s):
OTG A or Host
USBDRIM is shown in
Figure 18-63. USB Device RESUME Raw Interrupt Status Register (USBDRRIS)
31
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset
Bit
Field
Value
31-1
Reserved
0
0
PF
0
1
1366
M3 Universal Serial Bus (USB) Controller
OTG B or Device
Figure 18-63
and described in
Reserved
R-0
Table 18-68. USB Device RESUME Raw Interrupt
Status Register (USBDRRIS) Field Descriptions
Description
Reserved. Reset is 0x0000.000.
RESUME Interrupt Mask
The raw interrupt signal from a detected RESUME is sent to the interrupt controller. This bit should only
be set when a SUSPEND has been detected (the SUSPEND bit in the USBIS register is set).
A detected RESUME does not affect the interrupt status.
Copyright © 2012–2019, Texas Instruments Incorporated
Table
18-68.
SPRUH22I – April 2012 – Revised November 2019
www.ti.com
1
0
RESUME
R-0
Submit Documentation Feedback