Uart Lin Snap Shot (Uartlss), Offset 0X094; Uart Lin Timer (Uartltim), Offset 0X098; Uart Lin Snap Shot (Uartlss) Register; Uart Lin Timer (Uartltim) Register - Texas Instruments Concerto F28M35 Series Technical Reference Manual

www.ti.com

21.7.16 UART LIN Snap Shot (UARTLSS), offset 0x094

The UARTLSS register captures the free-running timer value when either the Sync Edge 1 or the Sync
Edge 5 is detected in LIN mode.
31
Reserved
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset
Table 21-18. UART LIN Snap Shot (UARTLSS) Register Field Descriptions
Bit Field
31-16 Reserved
15-0 TSS

21.7.17 UART LIN Timer (UARTLTIM), offset 0x098

The UARTLTIM register contains the current timer value for the free-running timer that is used to calculate
the baud rate when in LIN slave mode. The value in this register is used along with the value in the UART
LIN Snap Shot (UARTLSS) register to adjust the baud rate to match that of the master.
31
Reserved
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset
Table 21-19. UART LIN Timer (UARTLTIM) Register Field Descriptions
Bit Field
31-16 Reserved
15-0 TIMER
SPRUH22I – April 2012 – Revised November 2019
Submit Documentation Feedback
Figure 21-23. UART LIN Snap Shot (UARTLSS) Register
R-0
Value Description
Reserved
Timer Snap Shot
This field contains the value of the free-running timer when either the Sync Edge 5 or the Sync
Edge 1 was detected.
Figure 21-24. UART LIN Timer (UARTLTIM) Register
R-0
Value Description
Reserved
Timer Value
This field contains the value of the free-running timer.
Copyright © 2012–2019, Texas Instruments Incorporated
16 15
16 15
M3 Universal Asynchronous Receivers/Transmitters (UARTs)
Register Descriptions
TSS
R-0
TIMER
R-0
0
0
1479