Software Trigger Interrupt (Swtrig) Register; Software Trigger Interrupt (Swtrig) Register Field Descriptions - Texas Instruments Concerto F28M35 Series Technical Reference Manual

www.ti.com
When the MAINPEND bit in the Configuration and Control (CFGCTRL) register is set, unprivileged
software can access the SWTRIG register.
Note: Only privileged software can enable unprivileged access to the SWTRIG register.
31
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset
Table 25-37. Software Trigger Interrupt (SWTRIG) Register Field Descriptions
Bit Field
31-6 Reserved
5-0 INTID
SPRUH22I – April 2012 – Revised November 2019
Submit Documentation Feedback
Figure 25-31. Software Trigger Interrupt (SWTRIG) Register
Reserved
R-0
Value Description
Reserved
Interrupt ID
This field holds the interrupt ID of the required SGI. For example, a value of 0x3 generates an
interrupt on IRQ3.
Copyright © 2012–2019, Texas Instruments Incorporated
NVIC Register Descriptions
6 5 0
INTID
W0
1627
Cortex-M3 Peripherals