Usb Transmit Functional Address Endpoint N Registers (Usbtxfuncaddr[0]- Usbtxfuncaddr[15]); Usb Transmit Functional Address Endpoint N Registers (Usbtxfuncaddr[N]); Usb Transmit Functional Address Endpoint N Registers (Usbtxfuncaddr[N]) Field Descriptions - Texas Instruments Concerto F28M35 Series Technical Reference Manual

www.ti.com
18.5.22 USB Transmit Functional Address Endpoint n Registers (USBTXFUNCADDR[0]-
USBTXFUNCADDR[15])
The transmit functional address endpoint n 8-bit registers (USBTXFUNCADDR[n]) record the address of
the target function to be accessed through the associated endpoint (EPn). USBTXFUNCADDRx must be
defined for each transmit endpoint that is used.
Note: USBTXFUNCADDR0 is used for both receive and transmit for endpoint 0.
For the specific offset for each register see
Mode(s): OTG A or Host
The USBTXFUNCADDR[n] registers are shown in
Figure 18-27. USB Transmit Functional Address Endpoint n Registers (USBTXFUNCADDR[n])
7 6
Reserved
R-0
LEGEND: R/W = Read/Write; -n = value after reset
Table 18-30. USB Transmit Functional Address Endpoint n Registers
Bit Field Value
7 Reserved 0
6-0 ADDR 0
SPRUH22I – April 2012 – Revised November 2019
Submit Documentation Feedback
Table
(USBTXFUNCADDR[n]) Field Descriptions
Description
Reserved
Device Address specifies the USB bus address for the target Device.
Copyright © 2012–2019, Texas Instruments Incorporated
18-4.
Figure 18-27 and described in
ADDR
R/W-0
M3 Universal Serial Bus (USB) Controller
Register Descriptions
Table 18-30.
0
1327