Settings Additional Numbers Voip - Auerswald COMpact 5200 Advanced Information

Settings Additional Numbers VoIP

Proceed as follows:
• Using the Configuration Manager (page Réseaux publics > Voix sur
IP (VoIP) > Numéros Directs (SDA) en PTP supplémentaires)
Requirements:
• Configured PTP connection
Numéros Directs (SDA) en PTP supplémentaires
Select the extension number/bundle for that the additional numbers are to
be displayed/configured, provided that more then one PBX base number
was configured.
Phone number for CLIP no screening
Requirements:
• Set up phone number
• CLIP no screening switched on for the VoIP connection
• The exchange line must support CLIP no screening
Customer-specific phone number (e.g. a service phone number) that is
transferred to the destination by the exchange line without its correctness
being checked.
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018
Settings – Réseaux publics
Voix sur IP (VoIP)
549