Suzuki Baleno Manual page 106

Condition
Low or Uneven Trim
Height
Right-to-left trim height
(H) difference should be
within 15 mm (0.6 in)
with curb weight.
*Same with rear side.
Ride Too Soft
Suspension Bottoms
Body Leans or Sways in
Corners
Cupped Tires
GENERAL DIAGNOSIS CHART D
Possible Cause
1. Broken or sagging springs.
2. Over loaded.
3. Incorrect springs.
1. Faulty struts (shock absorber).
1. Overloaded.
2. Faulty struts (shocks absorber).
3. Incorrect broken or sagging springs.
1. Loose stabilizer bar.
2. Faulty struts (shocks absorbers) or
mounting.
3. Broken or sagging springs.
4. Overloaded.
1. Front struts defective.
2. Worn wheel bearings.
3. Excessive tire or wheel run-out.
4. Worn ball joints.
5. Tire out of balance.
STEERING, SUSPENSION, WHEELS AND TIRES (DIAGNOSIS) 3-5
Replace.
Check loading.
Replace.
Replace struts.
Check loading.
Replace struts.
Replace.
Tighten stabilizer bar bolts or nuts, or
replace bushes or joint.
Replace strut or tighten mounting.
Replace.
Check loading.
Replace.
Replace.
Replace tire or wheel disc.
Replace front suspension arm.
Adjust tire balance.
Correction