List Of Parameters - Siemens G130 List Manual

2 Parameters

2.2 List of parameters

2.2 List of parameters
Product: SINAMICS G130/G150, Version: 4806000, Language: eng
Objects: CU_G130_PN, CU_G150_PN, CU_G130_DP, CU_G150_DP, VECTOR_G, B_INF, TM31, TM120, TM150, TB30, TM54F_MA, TM54F_SL, ENC,
HUB
r0002 Control Unit operating display / CU op_display
CU_G130_PN, Can be changed: -
CU_G150_PN,
Data type: Integer16
CU_G130_DP,
P-Group: -
CU_G150_DP
Not for motor type: -
Min
0
Description: Operating display for the Control Unit (CU).
Value: 0:
10:
20:
25:
31:
33:
34:
35:
70:
80:
99:
101:
111:
112:
113:
114:
115:
117:
Notice: For several missing enable signals, the corresponding value with the highest number is displayed.
r0002 Drive operating display / Drv op_display
VECTOR_G Can be changed: -
Data type: Integer16
P-Group: -
Not for motor type: -
Min
0
Description: Operating display for the drive.
Value: 0:
10:
11:
12:
13:
14:
15:
16:
17:
18:
19:
21:
22:
23:
31:
35:
41:
42:
34
Operation
Ready
Wait for run-up
Wait for automatic FW update of DRIVE-CLiQ components
Commissioning software download active
Remove/acknowledge topology error
Exit commissioning mode
Carry out first commissioning
Initialization
Reset active
Internal software error
Specify topology
Insert drive object
Delete drive object
Change drive object number
Change component number
Run parameter download
Delete component
Operation - everything enabled
Operation - set "enable setpoint" = "1" (p1142, p1152)
Operation - set "enable speed controller" = "1" (p0856)
Operation - RFG frozen, set "RFG start" = "1" (p1141)
Operation - set "enable RFG" = "1" (p1140)
Oper. - MotID, excit. running and/or brake opens, SS2, STOP C
Operation - open brake (p1215)
Operation - withdraw braking with OFF1 using "ON/OFF1" = "1"
Operation - braking with OFF3 can only be interrupted with OFF2
Operation - brake on fault, remove fault, acknowledge
Operation - armature short-circ./DC brake act. (p1230, p1231)
Ready for operation - set "Enable operation" = "1" (p0852)
Ready for operation - de-magnetizing running (p0347)
Ready for operation - set "Infeed operation" = "1" (p0864)
Ready for switching on - set "ON/OFF1" = "0/1" (p0840)
Switching-on inhibited - carry out first commissioning (p0010)
Switching-on inhibited - set "ON/OFF1" = "0" (p0840)
Switching-on inhibited - set "OC/OFF2" = "1" (p0844, p0845)
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
117
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
250
List Manual (LH2), 07/2016, A5E03263479A
Access level: 1
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
-
Access level: 1
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
-
SINAMICS G130/G150