Siemens G130 List Manual page 18

2 Parameters
2.1 Overview of parameters
Note
The parameter list can contain parameters that are not visible in the expert lists of the particular
commissioning software (e.g. parameters for trace functions).
BICO: Full parameter name / short name
The following abbreviations can appear in front of the parameter name:
• BI:
• BO:
• CI:
• CO:
• CO/BO: Connector/Binector Output
Note
A connector input (CI) cannot be arbitrarily interconnected with any connector output (CO,
signal source).
When interconnecting a connector input using the commissioning software, only the
corresponding possible signal sources are listed.
Drive object (function module)
A drive object (DO) is an independent, "self-contained" functional unit that has its own
parameters and, in some cases, faults and alarms.
When carrying out commissioning using the commissioning software, you can select/deselect
additional functions and their parameters by activating/deactivating function modules
accordingly.
The parameter list specifies the associated drive object and function module for each individual
parameter.
Examples:
• p1070 CI: Main setpoint
• p1055 BI: Jog bit 0
18
Binector Input
This parameter is used for selecting the source of a digital signal.
Binector output
This parameter is available as a digital signal for interconnection with other
parameters.
Connector Input
This parameter is used for selecting the source of an "analog" signal.
Connector output
This parameter is available as an "analog" signal for interconnection with other
parameters.
This parameter is available as an "analog" and digital signal for interconnection
with other parameters.
VECTOR
The parameter is only available with the VECTOR drive object, regardless of which function
modules have been activated.
VECTOR
The parameter is available with the VECTOR drive object, regardless of which function
modules have been activated (i.e. it is available with every activated function module
belonging to the drive object).
SINAMICS G130/G150
List Manual (LH2), 07/2016, A5E03263479A