Siemens G130 List Manual page 64

2 Parameters
2.2 List of parameters
r0064 CO: Speed controller system deviation / n_ctrl sys dev
VECTOR_G Can be changed: -
Data type: FloatingPoint32
P-Group: Displays, signals
Not for motor type: -
Min
- [rpm]
Description: Displays the actual system deviation of the speed controller.
Note: In servo control mode with active reference model, the system deviation to the P component of the speed controller is
displayed.
r0065 Slip frequency / f_Slip
VECTOR_G Can be changed: -
Data type: FloatingPoint32
P-Group: Displays, signals
Not for motor type: -
Min
- [Hz]
Description: Displays the slip frequency for induction motors (ASM).
r0066 CO: Output frequency / f_outp
VECTOR_G Can be changed: -
Data type: FloatingPoint32
P-Group: Displays, signals
Not for motor type: -
Min
- [Hz]
Description: Display and connector output for the output frequency of the Motor Module.
Dependency: Refer to: r0024
Note: The output frequency is available smoothed (r0024) and unsmoothed (r0066).
r0067 CO: Output current maximum / I_outp max
VECTOR_G Can be changed: -
Data type: FloatingPoint32
P-Group: Displays, signals
Not for motor type: -
Min
- [Arms]
Description: Display and connector output for the maximum output current of the power unit.
Dependency: The maximum output current is determined by the parameterized current limit and the motor and converter thermal
protection.
Refer to: p0290, p0640
64
Calculated: -
Dyn. index: -
Unit group: 3_1
Scaling: p2000
Max
- [rpm]
Calculated: -
Dyn. index: -
Unit group: 2_1
Scaling: p2000
Max
- [Hz]
Calculated: -
Dyn. index: -
Unit group: 2_1
Scaling: p2000
Max
- [Hz]
Calculated: -
Dyn. index: -
Unit group: 6_2
Scaling: p2002
Max
- [Arms]
List Manual (LH2), 07/2016, A5E03263479A
Access level: 3
Func. diagram: 5040, 6040
Unit selection: p0505
Expert list: 1
Factory setting
- [rpm]
Access level: 3
Func. diagram: 6310, 6700,
6727, 6730, 6732
Unit selection: p0505
Expert list: 1
Factory setting
- [Hz]
Access level: 3
Func. diagram: 5300, 5730,
6300, 6310, 6730, 6731, 6799
Unit selection: p0505
Expert list: 1
Factory setting
- [Hz]
Access level: 3
Func. diagram: 5722, 6300,
6301, 6640
Unit selection: p0505
Expert list: 1
Factory setting
- [Arms]
SINAMICS G130/G150