Siemens G130 List Manual page 56

2 Parameters
2.2 List of parameters
r0039[0...2] CO: Energy display / Energy displ
VECTOR_G Can be changed: -
Data type: FloatingPoint32
P-Group: Displays, signals
Not for motor type: -
Min
- [kWh]
Description: Displays the energy values at the output terminals of the power unit.
Index: [0] = Energy balance (sum)
[1] = Energy drawn
[2] = Energy fed back
Dependency: Refer to: p0040
Note: For index 0:
Difference between the energy drawn and energy that is fed back.
p0040 Reset energy consumption display / Energy usage reset
VECTOR_G Can be changed: U, T
Data type: Unsigned8
P-Group: Displays, signals
Not for motor type: -
Min
0
Description: Setting to reset the display in r0039 and r0041.
Procedure:
Set p0040 = 0 --> 1
The displays are reset and the parameter is automatically set to zero.
Dependency: Refer to: r0039
r0041 Energy consumption saved / Energy cons saved
VECTOR_G Can be changed: -
Data type: FloatingPoint32
P-Group: Displays, signals
Not for motor type: -
Min
- [kWh]
Description: Displays the saved energy referred to 100 operating hours.
Dependency: Refer to: p0040
Note: This display is used for a fluid-flow machine.
The flow characteristic is entered into p3320 ... p3329.
For an operating time of below 100 hours, the display is interpolated up to 100 hours.
r0042[0...2] CO: Process energy display / Proc energy disp
VECTOR_G Can be changed: -
Data type: Integer32
P-Group: Displays, signals
Not for motor type: -
Min
- [Wh]
Description: Display and connector output for the energy values at the output terminals of the power unit.
Index: [0] = Energy balance (sum)
[1] = Energy drawn
[2] = Energy fed back
Dependency: Refer to: p0043
56
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
- [kWh]
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
1
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
- [kWh]
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
- [Wh]
List Manual (LH2), 07/2016, A5E03263479A
Access level: 2
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
- [kWh]
Access level: 2
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
0
Access level: 2
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
- [kWh]
Access level: 2
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
- [Wh]
SINAMICS G130/G150