Parameters/Address Space; Parameters - Siemens SIMATIC S7-1500 Manual

Parameters/address space

4.1

Parameters

DQ 16x230VAC/2A ST parameters
When you assign the module parameters in STEP 7, you use various parameters to specify
the module properties. The table below lists the parameters that can be set. The effective
range of the configurable parameters depends on the type of configuration. The following
configurations are possible:
● Central operation with a S7-1500 CPU
● Distributed operation on PROFINET IO in an ET 200MP system
● Distributed operation on PROFIBUS DP in an ET 200MP system
For parameter assignment in the user program, the parameters are transferred to the
module with the WRREC instruction (reconfiguration in RUN) using data records; see section
Parameter assignment and structure of the parameter data records (Page 31).
Table 4- 1 Configurable parameters and their defaults
Parameter Range of values
Diagnostics
No supply voltage L+ Yes/No
Reaction to CPU
•
STOP
•
•
Digital output module DQ 16x230VAC/2A ST Relay (6ES7522-5HH00-0AB0)
Manual, 03/2015, A5E34934019-AA
Default
No
Turn off
Turn off
Keep last value
Output substitute
value 1
Reconfigura- Range of effectiveness with configuration
tion in RUN
Integrated in the hard-
ware catalog STEP 7,
V13 SP1 or higher with
HSP 0119 or GSD file
PROFINET IO
Yes Module
Yes Channel
software, e.g. STEP 7
GSD file
PROFIBUS DP
Module
Channel
4
14