2.2 Scanning System
2.2.1 After Replacing the
Scanning Lamp
There is no particular work to perform after replacing
the scanning lamp.
2.2.2 After Replacing the
Copyboard Glass
Enter the value indicated on the copyboard glass (F01-
301-04) using the following service mode items:
COPIER>ADJUST>CCD>W-PLT-X/Y/Z
Use it to enter data for the standard white plate.
8 2 0 6 8 6 6 7 9 3 4 9
F-2-16
2.2.3 After Replacing the
CCD Unit
When you have replaced the CCD unit, enter the
values (for color displacement correction in sub
scanning direction) indicated on the label attached to
the unit in service mode:
COPIER>ADJUST>CCD>CCDU-RG/GB
Use it to enter the image position correction value
(dependent on the CCD unit).
0000-5354
0000-5355
0000-5356
Chapter 2
2-5