Kompella Mpls L2Vpn Configuration Commands - 3Com 3031 Command Reference Manual

Kompella MPLS L2VPN
Configuration
Commands
undo mpls l2vc
View
Interface view
Parameter
ip-address: lsr-id address of peer PE.
vc-id: Connected VC ID.
Description
Using the mpls l2vc command, you can create an LDP connection. Using the undo
mpls l2vc command, you can delete the connection.
Supporting interface types: Serial, Asy Serial, POS, ATM, ATM subinterface,
Ethernet, Ethernet subinterface, VE, GE, GE subinterface.
Enable MPLS L2VPN and encapsulate CCC on the interface before using this
command.
For the related command, see mpls l2vpn and ccc.
Example
Create LDP connection.
[3Com-Ethernet3/0/0] mpls l2vc 10.0.0.11
ce Syntax
ce name [ id id range range ] [ default-offset offset ] ]
undo ce name
View
MPLS L2VPN view
Parameter
name: CE name, unique in the current PE VPN.
id: CE ID, unique in VPN, represents a CE, ranging from 1 to 65535.
offset:Specifies default offset value of the original CE.
range: CE range, in other words, the maximum CE number local CE can connect
with, ranging from 1 to 100. Default value is 10.

Kompella MPLS L2VPN Configuration Commands

809