3Com 3031 Command Reference Manual page 97

User Interface Configuration Commands 97
Description
Using the screen-length command, you can set the number of rows displayed in
one screen at the terminal. Using the undo screen-length command, you can
restore the number of rows in a terminal screen to 24.
By default, the number of rows in one screen is 24.
screen-length 0 indicates to disable the split screen function.
Example
Set the number of rows in one screen of the terminal to 30.
[3Com-ui-console0] screen-length 30
send
Syntax
send [ number | all | type-name number ]
View
User view
Parameter
all: Sends messages to all user interfaces.
type-name: Name of user interface type.
number: Absolute/Relative user interface number.
Description
Using the send command, you can transfer messages between user interfaces.
Using the send all command, you can send messages to all user-interfaces.
Using the send number command, you can send messages to the user interface
defined by specifying its number.
Using the send type-name number command, you can send messages to the user
interface of type-name with specified number.
Example
Send messages to the console user-interface.
<3Com> send con 0
Enter message, end with CTRL+Z or Enter; abort with CTRL+C:
Hello,good morning!
Send message? [Y/N]
set authentication
Syntax
password
set authentication password { simple | cipher } password
undo set authentication password