3Com 3031 Command Reference Manual page 366

366 C 4: L L
HAPTER INK AYER
reset xot
P
ROTOCOL
View
User view
Parameter
x121-address: x121 destination address.
Description
Using the pad command, you can establish a PAD connection with the remote site.
PAD is a kind of application similar to telnet. It can establish the connection
between two ends through X121 address, and then, to carry out configuration
operations.
Example
Establish a PAD connection, and the destination x121 address is 2.
<03Com> pad 2
Syntax
reset xot local local-ip-address local-port remote remote-ip-address remote-port
View
User view
Parameter
local-ip-address: Local IP address of the XOT connection.
local-port: Local port number of the XOT connection.
remote-ip-address: Remote IP address of the XOT connection.
remote-port: Remote port number of the XOT connection.
Description
For SVC, using the reset xot command, you can initiatively clear an XOT link.
For PVC, using reset xot command, you can initiatively reset an XOT link.
You can initiatively clear or reset the XOT link using the command reset xot. When
you clear or reset the XOT link, you can obtain the required ports using the
commands display x25 xot or display tcp status.
For the related commands, see display x25 vc, x25 switching, display x25 xot, and
display tcp status.
Example
Clear or reset an XOT link.
[3Com] reset xot local 10.1.1.1 1998 remote 10.1.1.2 1024