3Com 3031 Command Reference Manual page 34

34 C 2: S M & M C
HAPTER YSTEM AINTENANCE ANAGEMENT OMMANDS
By default, executing display logbuffer without any parameter displays all the
information in the logbuffer.
If the number of information entries in the current logging buffer is smaller than
the specified size-value, logging information of the actual entries will be displayed.
For related commands, see info-center enable, info-center logbuffer, and display
info-center.
Example
Display the information in the logging buffer.
<3Com> display logbuffer
Logging Buffer Confiuration and contents:enabled
allowed max buffer size : 1024
actual buffer size : 256
channel number : 4 , channel name : logbuf
dropped messages : 0
overwritten messages : 0
current messages : 96
%8/28/2101 5:34:48-IC-7-SYS_RESTART:
System restarted --
3Com Versatile Routing Platform Software
Copyright (c) 2000-2002 by VRP Team Beijing Institute 3Com Tech, Inc
%9/9/2002 15:50:36-SHELL-5-CMD:task:CFM ip:** user:**
command:interface Ethernet
%11/6/2002 22:18:52-SHELL-5-CMD:task:CFM ip:** user:**
command:interface Aux0
%3/15/2003 15:50:36-SHELL-5-CMD:task:CFM ip:** user:**
command:controller E1 3/0
%4/1/2003 21:29:47-PHY-2-PHY: Console0: change status to up
display trapbuffer Syntax
display trapbuffer [ size sizeval ]
View
Any view
Parameter
size: Specifies the number of information entries in the logbuffer.
sizeval: The number of displayed information entries.
Description
Using the display trapbuffer command, you can display the information recorded
in the trapbuffer.
By default, executing the command without any parameter displays all the
information in the trapbuffer.