3Com 3031 Command Reference Manual page 693

multicast minimum-ttl
multicast
packet-boundary
-1 12.110.0.2
Incoming Interface Address: 11.110.0.2
Previous-Hop Router Address: 11.110.0.4
Input packet count on incoming interface: 316
Output packet count on outgoing interface: 135
Total number of packets for this source-group pair: 4
Protocol: PIM
Forwarding TTL: 0
Forwarding Code: No error
-2 11.110.0.4
Incoming Interface Address: 127.0.0.5
Previous-Hop Router Address: 0.0.0.0
Input packet count on incoming interface: 0
Output packet count on outgoing interface: 0
Total number of packets for this source-group pair: 4
Protocol: Unknown
Forwarding TTL: 0
Forwarding Code: No error
Syntax
multicast minimum-ttl ttl-value
undo multicast minimum-ttl
View
Interface view
Parameter
ttl-value: The minimum TTL value, ranging from 0 to 255.
Description
Using the multicast minimum-ttl command, you can configure the minimum TTL
value for multicast forwarding. Using the undo multicast minimum-ttl command,
you can remove the minimum TTL value configured.
By default, no minimum TTL value for multicast forwarding is configured.
Example
Configure the minimum TTL value for multicast forwarding to 8.
<3Com-Ethernet1/0/1] multicast minimum-ttl 8
Syntax
multicast packet-boundary acl-number
undo multicast packet-boundary
View
Interface view
Parameter
acl-number: Number of basic or advanced ACL, ranging from 1 to 199.
Multicast Common Configuration Commands 693