3Com 3031 Command Reference Manual page 486

486 C 5: N P
HAPTER ETWORK ROTOCOL
Interface-num: Interface number.
Interface-name: Interface name.
Description
Using the display ipx interface command, you can view IPX interface configuration
information and interface parameters in communication devices.
Example
Display IPX configuration and statistics of the interface Ethernet1/0/0.
<3Com> display ipx interface ethernet 1/0/0
Ethernet1/0/0 is up
IPX address is 2.00E0-FC01-0000 [up]
SAP is enabled
Split horizon is enabled
Update change only is disabled
Forwarding of IPX type 20 propagation packet is enabled
Delay of this IPX interface, in ticks is 1
SAP GNS response is enabled
RIP packet maximum size is 432 bytes
SAP packet maximum size is 480 bytes
IPX encapsulation is Netware 802.3
0 received, 0 sent
0 bytes received, 0 bytes sent
0 RIP received, 0 RIP sent, 0 RIP discarded
0 RIP specific requests received, 0 RIP specific responses sent
0 RIP general requests received, 0 RIP general responses sent
0 SAP received, 0 SAP sent, 0 SAP discarded
0 SAP requests received, 0 SAP responses sent
Table 9 Description of display information of the display ipx interface command
Item
Ethernet1/0/0 is ...
IPX address is ...
[up]
SAP is ...
Split horizon is ...
Update change only is ...
Forwarding of IPX type 20
propagation packet is ...
Delay of this IPX interface, in ticks is
...
SAP GNS response is ...
RIP packet maximum size is ... bytes Maximum size of RIP updating packet on the current interface. The related
SAP packet maximum size is ... bytesMaximum size of SAP updating packet on the current interface. The relate
received
sent
bytes received
bytes sent
RIP received
RIP sent
RIP discarded
RIP specific requests received
RIP specific responses sent
RIP general requests received
Description
In terms of physical layer and link layer status, the current interface is UP, DOWN or a
IPX network ID and node value of the current interface. Refer to the comm
ipx enable for details of network ID and node value.
IPX protocol status of the current interface.
Whether SAP is enabled on the current interface.
Whether split horizon is enabled on the current interface. The related com
split-horizon.
Whether trigger update is enabled on the current interface. The related co
update-change-only.
Whether IPX type 20 propagation packet is permitted to be forwarded on t
related command is ipx netbios-propagation.
Delay value of the current interface. The value is configured by the ipx tic
Whether SAP GNS reply is enabled on the current interface. The related co
gns-disable-reply.
mtu.
mtu.
Total number of packets received on the current interface.
Total number of packets sent on the current interface.
Total number of bytes received on the current interface.
Total number of bytes sent on the current interface.
Total number of IPX RIP packets received on the current interface.
Total number of IPX RIP packets sent on the current interface.
Total number of IPX RIP packets discarded on the current interface.
Total number of IPX RIP specific requests received on the current interface
Total number of IPX RIP specific responses sent on the current interface.
Total number of IPX RIP general requests received on the current interface