3Com 3031 Command Reference Manual page 523

DLSw Configuration Commands 523
By default, the LLC2 REJ time is 500ms.
The LLC2 REJ time refers to the waiting time for the acknowledgement frame to
come after a deny frame is sent.
Example
Configure the LLC2 REJ time as 2000ms.
[3Com-Ethernet1/0/0] llc2 timer reject 2000
reset dlsw bridge-entry Syntax
reset dlsw bridge-entry
View
User view
Parameter
None
Description
Using the reset dlsw bridge-entry command, you can clear the entry cache
information in the DLSw bridge group.
Example
Clear the entry cache information in the DLSw bridge group.
<3Com> reset dlsw bridge-entry
reset dlsw circuits
Syntax
reset dlsw circuits [ circuit-id ]
View
User view
Parameter
circuit-id: The virtual circuit ID of DLSw, ranging from 0 to 4294967295.
Description
Using the reset dlsw circuits command, you can clear the DLSw virtual circuit
information.
Example
Clear the virtual circuit information with the virtual circuit number of 100.
<3Com> reset dlsw circuits 100
sdlc controller
Syntax
sdlc controller sdlc-address
undo sdlc controller sdlc-address