3Com 3031 Command Reference Manual page 38

38 C 2: S M & M C
HAPTER YSTEM AINTENANCE ANAGEMENT OMMANDS
By setting channel number after enabling logbuffer, you can specify information
outbound direction..
For related commands, see info-center enable, display info-center, and display
info-center logbuffer.
Example
Enable the router to send information to the logbuffer and set the logbuffer size
to 50.
[3Com] info-center logbuffer size 50
info-center loghost
Syntax
info-center loghost X.X.X.X [ channel { channel-number | channel-name } | facility
local-number | language { chinese | english } ] *
undo info-center loghost X.X.X.X
View
System view
Parameter
X.X.X.X: IP address of the loghost.
channel: Information channel for the loghost.
channel-number: Channel number ranging 0 to 9. That is, the system has 10
channels.
channel-name: Channel name.
facility: Sets the recording tool of the loghost.
local-number: Recording tool of the loghost, which is ranging local0 to local7.
language: Sets the logging language.
chinese and english: Logging language which can be Chinese or English.
Description
Using the info-center loghost command, you can enable the router to output
information to the loghost. Using the undo info-center loghost command, you can
cancel the current configuration.
By default, no information is output to the loghost.
If not specified, the information channel for the loghost defaults to channel2 that
is named loghost, the loghost recording tool local-number to local7, and the
language to english.