3Com 3031 Command Reference Manual page 317

Frame Relay Configuration Commands 317
Example
Configure Frame Relay encapsulation on interface Serial1/0/0 and select the
nonstandard encapsulation compatible format.
[3Com-Serial1/0/0] link-protocol fr nonstandard
link-protocol fr mfr Syntax
link-protocol fr mfr interface-number
View
Interface view
Parameter
interface-number: Interface number, in 3-dimension form (slot number/card
number/interface number).
Description
Using the link-protocol fr mfr command, you can configure the current physical
interface as a multilink frame relay bundle link and bundle it onto a specified MFR
interface.
By default, there is no multilink frame relay bundle link.
When this command is configured, the specified MFR interface must exist. A
maximum of 16 physical interfaces can be bundled onto an MFR interface.
To delete a physical interface from an MFR interface, use the link-protocol
command to apply a link layer protocol of non frame relay MFR to the interface.
For the related commands, see interface mfr and mfr link-name.
Example
Configure the current serial interface as a bundle link and add it onto the frame
relay bundle interface mfr4/0/123.
[3Com-Serial4/1/2] link-protocol fr mfr 4/0/123
mfr bundle-name Syntax
mfr bundle-name [ name ]
undo mfr bundle-name [ name ]
View
MFR interface view